World steel news and information portal - contact info.
sotn
Steelonthenet.com Discussion Forum
Sign up Latest Topics
 
 
 


Reply
  Author   Comment  
sunimports

Junior Member
Registered:
Posts: 5
Reply with quote  #1 

We have for sale following mentioned equipments- these are brief details and more details can be provided on request.

Kindly go through the same and advise your interest.

1. USED 18" HERR SLITTING LINE

UNCOILER:

24" ID (16" TO 24")

24" WIDE

SLITTER:
DIAMETER OF ARBORS.......... 3-1/2"
18" WIDE

 

2. USED 36" X 6" PAXSON SLITTING LINE

UNCOILER:
CAPACITY ............................. 10,000 LBS
MAX COIL DIA ......................... 48"

PULL THRU TYPE SLITTING HEAD:
ARBOR DIA ............................ 6"
FACE ................................. 42"

 

3. USED 1500MM X 3MM SLITTING LINE

Built: 2000

Thickness: 0.5 - 3.0mm, Strip Width: 300 - 1500mm, Coil Weight: 25,000 kg, Speed: 150 m/min

 

4. USED 1500MM X 3MM SLITTING LINE

Built: 1994

Thickness: 0.4 - 3.0mm, Strip Width: 1500mm, Coil Weight: 15,000 kg, Speed: 40 m/min

 

5. Used Durmech 3.2mm x 1500mm Slitting Line

Gauge 0.5 – 3.5mm mild steel

Coil Weight: 25T on and off

Max No of Cuts @ 0.5mm  @ 3.5mm

Speed: 180/200m/min

Coil Dimension I/D: 508mm Max O/D: 1800mm

 

6. USED 36" X 6" PAXSON / WEAN SLITTING LINE

20,000 LBS X 54" WEAN UNCOILER:
ID RANGE .............................. 14" TO 18""

36" X 6" PAXSON SLITTER:
MAX WIDTH ............................. 36"
ARBOR DIAMETER ........................ 6"

 

7. 1500MM X 6MM SLITTING LINE

Built: 2006

Thickness: 1.2 - 6.0mm, Strip Width: 1500mm, Coil Weight: 30,000 kg, Speed: 60 m/min

 

8. USED 60" X 8" X 45,000 LB PAXSON SLITTING LINE

MATERIAL THICKNESS (MAX) ..... 7 GAUGE

MATERIAL THICKNESS (MIN) ..... 26 GAUGE

SLITTER HEAD:
ARBOR WIDTH ................. 60"
ARBOR DIAMETER .............. 8"

9. USED 60" X 40,000 LB X 7" ARBOR DAHLSTROM LOOP SLITTING LINE

UNCOILER
WIDTH ............................. 60"
COIL OD ........................... 72"

SLITTING HEADS
ARBOR DIAMETER ..................... 7"

 

  1. 10.         USED 48" X 6" X 20,000 LB PAXSON SLITTING LINE

DAHLSTROM UNCOILER ....
CAPACITY .............. 20,000 LB X 60" WIDE
ID RANGE .............. 18" TO 24" HYDRAULIC EXPANSION

SLITTING HEAD
ARBOR DIAMETER ........ 6"
WIDTH CAPACITY ........ 54" MAXIMUM

 

  1. 11.         USED 36" X 6" X 15,000 LBS MCKAY PULL THRU SLITTING LINE

UNCOILER:
MANDREL LENGTH ..................... 38"
RANGE ID ..........................
 14" TO 20"

SLITTER:
NOMINAL WIDTH ...................... 36"
BETWEEN HOUSINGS ................... 42"
DIAMETER OF ARBOR .................. 6"

 

  1. 12.         USED 1500MM X 3MM CUT-TO-LENGTH LINE

Built: 1997

Thickness: 0.4 - 3.0mm, Strip Width: 1500mm, Coil Weight: 25,000 kg, Speed: 50 m/min

 

  1. 13.         USED 48" X 20,000 LB RED BUD CUT TO LENGTH LINE

COIL LIFTER
COIL REEL
STRIAGHTENER & FEEDER
SLITTING/EDGING ARBOR

 

  1. 14.         USED 60" X 14 GAUGE DAHLSTROM CUT TO LENGTH LINE SHEAR

   MODEL ................. SH-60-14 SHEAR 26-14 GA

 CAPACITY .............. 60" X 14 GAUGE

 

  1. 15.         USED 48" x 10 GA (.134") x 30,000 LB DAHLSTROM CUT-TO-LENGTH LINE

Coil  width,         maximum       48"

Thickness  capacity, maximum     .134"

Thickness  capacity, minimum     .018"

Coil  weight,        maximum     30,000 lbs

Coil  O.D. maximum 60"

 

  1. 16.         USED 30,000 LB X 48" X .135" RED BUD CUT TO LENGTH LINE,

Material Data
Maximum Thickness: 0.135" (3.43 mm)
Minimum Thickness: 0.020" (0.51 mm)

Uncoiler
Maximum Entry Weight: 30,000 lbs (13,608 kg)
Maximum Entry Width (Machine Clearance): 51" (1295 mm)
Maximum Entry Coil Outside Diameter: 75" (1905 mm)

 

  1. 17.         USED 72" W X 14 GA X 40,000 LB DAHLSTROM CUT TO LENGTH

COIL CAPACITY . 40,000 LBS

LENGTH CAPACITY . 12" TO 144" (ALL COMPONENTS)

WIDTH CAPACITY .  12" TO 72" (ALL COMPONENTS)

 

  1. 18.         Used 50mm ERW Tube Mill

Coil material: hot rolling carbon steel

Coil sheet width: ~160 mm

Tube diameter: 20 mm~50 mm

Tube thickness: 1.0~3.0 mm

 

  1. 19.         New 3.125" x .134"  High Frequency Tube Mill Line

Maximum Tube Diameter: 3.125" (79.3 mm)

Minimum Tube Diameter: 1" (25 mm)

Maximum Round Wall: .134" (3.4 mm)

Maximum Shapes Wall: .120" (3 mm)

Minimum Wall: .032" (.8 mm)

 

  1. 20.         Used Φ355× 10 mm API ERW/HF Pipe Mill

TAIWAN Built Tube Mill and Slitting Line

Rounds:φ114 – 355 mm

Thickness:4 – 10 mm

Sheet width: 350 - 1170 mm

Coil I.D.: 610/762 mm

Coil O.D.: Φ1500 - 2100 mm

 

  1. 21.         RHM-8/4 4-DIE TUBE SWAGER

Built: 2005 (Unused)

Tube Diameter: 100mm, Wall Thickness: 6mm

 

  1. 22.         USED COMPLETE LSAW 3000MM PIPE MILL

Built: 1980/2010

Max. Pipe Diameter: 2500mm, Max. Wall Thickness: 38mm, Pipe Length: 6 & 12m, Comprises: (1) 12m 3-Roll Bending Machine, (2) 6m 3-Roll Bending Machines, Brush Cleaning, Edge Milling Machine, Welders etc.

 

  1. 23.         USED 2500MM X 25.4MM SPIRAL WELDED PIPE MILL

Built: 2010

Strip Width: 900 - 2000mm, Thickness: 6.0 - 25.4mm, Pipe Diameter: 400 - 2500mm, Pipe Length: 8 - 24m

 

  1. 24.         USED 406MM (16") ERW API PIPE MILL

Built: 1980

Pipe Diameter: 101.6 - 406mm, Wall Thickness: 3 - 12.7mm, Length: 6.5 - 14 metres, Speed: 15 - 50 m/min, Includes KOCKS Straightener, 2 x Chamfering Machines, 2 x Hydrostatic Testers

 

  1. 25.         USED MTU-45 TITANIUM & STAINLESS STEEL WEDLED TUBE MILLS (2 AVAILABLE)

Built: 2011

Tube Diameter: 12.7 - 50.8mm Wall Thickness: 0.4 - 2mm Titanium, 0.5 - 3.5mm Stainless Steel, Speed: 15m/min max, Length: 6 - 30m

 

  1. 26.         Used 3-Roll Bending Pipe Line (1,676mm X 25.4mm X 12.2m)

PLATE EDGE MILLING M/C :

PLATE WIDTH  : 1,180 mm~ 5,300mm  / THICKNESS  : 6.4mm ~ 25.4mm  /  PLATE LENGTH  : 5,500mm ~ 12,200mm

3-ROLL BENDING M/C :

THICKNESS : 6.4mm ~ 25.4mm  (OLD) / BENDING DIAMETER : 22" ~ 80" /  LENGTH : 6,000mm ~ 12,200mm

POST BENDING M/C

BASIC MATRIAL : X-70 / DIAMETER : 22" ~ 80" / THICKNESS : 6.4mm ~ 25.4mm / LENGTH : 6,000mm ~ 12,200mm

TACK WELDING M/C

DIAMETER : 22" ~ 80"  / THICKNESS : 6.4mm ~ 25.4mm / LENGTH : 3,000mm ~ 12,200mm / WELDING SPEED : MAX. 3,000mm/min

 

  1. 27.         USED 160 TON SINGLE PULL MECHANICAL TUBE DRAWBENCH

Built: 1981

Draw Force: 160 Tons, Tube O.D: 69 - 230 (271mm), Draw Length: Input 15m, Output 18m,

Draw Speed: 3.27/ 16.35 / 26.17 m/min.

 

  1. 28.         USED HPZ 600/3-30R 60 TON TRIPLE DRAW HYDRAULIC TUBE DRAWBENCH

Built: 2002

Input Tube: 12 - 71mm Diameter, 1.19 - 7.6mm Wall, 3 - 22m Long, Finished Tube: 11.4 - 63.5mm Diameter, 1.06 - 5.3mm Wall, 4.1 - 33m Long, Draw Speed: 91 m/min.

 

  1. 29.         USED TIG STAINLESS STEEL WELDED TUBE MILLS (9)

Built: 2000

Comprises: (3) 12,8 - 25,4mm Mills, (1) 31,8 - 38,1mm Mill, (2) 50,8 - 76,3mm Mills, (1) 96,0 - 150,4mm Mill, (1) 15x15 - 100x50mm Mill, (1) unto 40x40mm Mill. Includes Belt Type Polishing Lines, Straighteners, Tooling

 

  1. 30.         USED 4- HI SINGLE STAND COLD ROLLING MILL, MAKE HITACHI, JAPAN

Material : Cold Roll Mild Steel Stainless Steel

Thickness : 0.2 ~ 4.2 mm

Width : 350 ~ 635 mm

Coil Weight : 6,500 kg

Line Speed : 0 ~ 75 ~ 150 m/min.

 

  1. 31.         20 Hi Mill -Complete plant

Manufactory Hitachi, Japan

Built Year(Date) 1968

 

No1) 20 Hi Mill 
Tension 3Model (750Kg. 2,500Kg. 4,000Kg)
Speed 180mpm. 150mpm. 120mpm.
Motor Capacity :
- Mill DC130 Kw 600/1,200 rpm
- Reel DC 90Kw 520/1,040 rpm
- Unwinder AC 15Kw 1,160 rpm
- Rewinder VS 11Kw 1,650/165 rpm

No2) 12 Hi Mill 
Speed 28mpm
Motor Capacity :
- Mill DC67 Kw 400/1,000 rpm
- Reel DC 13Kw 400 rpm

No3) 6 Hi Mill 
Tension 100~1,000 Kg

 

No4) Roll Grinder

Length 2,000mm

 

No5) Alkali Cleaning Line (D/G Line)

Speed Max 40mpm

Width Max 350mm

 

No6) B/A Line #

Speed Max 14mpm

 

No7)B/A Line #2

Speed Max 20mpm

 

No8)Skin Pass Mill

Line Max Speed 100m/min

Thickness 0.1~0.6mm

Width 100~380mm

 

No9) Slitter Line

Thickness 1.0t ~ 0.05t

Width 400mm~500mm

 

No10) Shear

 

  1. 32.         Used Rebar mill - Make : Japanese

Tonnage : 50 Ton/Hr.

Size of Rebar : 10-32mm

Products : Deformed Bars (rebar)

 

  1. 33.         Rebar mill - Make : Japanese

Production Size : Bar (D10, D13, D16, D19)

Production Capacity: 32tons/Hr (No available heating furnace)

Billet  Size : Billet 120Aq, 125Aq,  Length: Max. 3m

 

  1. 34.         USED KPW 50 VMR COLD PILGER MILL

Built: 1978

Diameter: Ø20 - 51 Hollow, Ø14 - 38mm Rolled, Thickness: 2 - 10mm Hollow, 1 - 6.5mm Rolled, Full Ring Design.

 

  1. 35.         USED KZ-IIB/15 COMBINED DRAWING LINE

Built: 1987

Max. Input Tube Diameter: 63mm, Speed: 70 m/min, Draw Force: 15,000 kg, Straight Lengths to Coil. Can be installed with 3066 & 3067 as a Cascade.

 

  1. 36.         USED KZ-IIB/10 COMBINED DRAWING LINE

Built: 1987

Max. Input Tube Diameter: 53mm, Speed: 80 m/min, Draw Force: 10,000 kg, Coil-to-Coil.

 

  1. 37.         USED PBRV6 2-ROLL VERTICAL BAR STRAIGHTENER

Built: 1977

Bar Diameter: 20 - 108mm, Speed: 15 - 30 m/min, Bar Length: 2 - 6.5m, Hydraulic Roll Load Bearing Sensor for hot rolled bars.

 

  1. 38.         USED PBR8 RF 2-ROLL RING FRAME VERTICAL BAR STRAIGHTENER

Built: 1990

Bar Diameter: 25 - 152mm, Speed: 3 - 30 m/min, Bar Length: 2 - 6m, Hydraulic Roll Load Bearing Sensor for hot rolled bars.

 

  1. 39.         6CR11 6-ROLL VERTICAL TUBE STRAIGHTENER

Built: 2010 (New, still in packing cases)

Pipe Diameter: 146 - 377mm, Wall Thickness: 5.5 - 22.5mm.

 

  1. 40.         USED VBM 75 AS 2-ROLL VERTICAL BAR STRAIGHTENER

Built: 1986

Bar Diameter: 16 - 75mm, Speed: 15-30 m/min, Hydraulic Roll Load Compensation for hot rolled bars

 

  1. 41.         MW800 I/7 7 ATAND SIZING MILL

Built: 2010 (New, still in packing cases)

Pipe Diameter: 146 - 340mm, Wall Thickness: 5.5 - 22.5mm, 3-Roll Design, 7 Adjustable and 9 Fixed Stands.

 

  1. 42.         USED 80 MN HYDRAULIC PULL-DOWN FORGING PRESS

Built: 2010

2 Column Design, Main Cylinders: 3, Stroke: 2500mm, Press Capacity: Forging 63 MN, Upsetting 80 MN, Daylight: 6100mm.

 

  1. 43.         USED 80 TON RAIL BOUND FORGING MANIPULATOR

Built: 2010

Carrying Capacity: 80 Ton, Load Moment: 200 MT, Highest Lifting Position: 4500mm, Lowest Lifting Position: 1500mm, Jaw Opening: 600 - 2600mm, Jaw Opening with Insert: 200mm, Drive: 4 x 115 kW. Available with Forging.

 

  1. 44.         USED COMPLETE ALUMINIUM FOIL PLANT WITH MELTING & CASTING

1650MM 4-HIGH ROUGHING MILL, ACHENBACH 1450MM & 800MM 4-HIGH FOIL MILLS, SLITTING, CUT-TO-LENGTH AND ROLL GRINDING SHOP.

 

  1. 45.         USED DMBL300-6000 CNC DEEP HOLE BORING MACHINE

Built: 2009

Solid Drilling Diameter: 60 - 190mm, Trepanning Diameter: 300mm, Counter Boring Diameter: 300mm, Drilling Depth: 6000mm

 

  1. 46.         USED F1 SINGLE ENDED AUTOMATIC CHAMFERING MACHINE

Built: 1986

Diameter Range: Rounds 4 -10mm, Hexagons 4 - 9mm, Squares 4 - 7mm, Tubes 6 - 16mm, Length: 6000mm

 

  1. 47.         USED RAW 125/80 RADIAL/AXIAL RING ROLLING MILL

Built: 1965 (Rebuilt 2005, including New Electrics)

Max. Ring Diameter: 3000mm, Height: 500mm, Weight: 6000 kg.

 

  1. 48.         USED 5300MM RING ROLLING MILL

Built: 2008

Ring Diameter: 800 - 5300mm, Ring Height: 100 - 1000mm, Radial Force: 3500 kN, Axial Force: 3500 kN

 

  1. 49.         USED 140 x 355 x 405MM 4-HIGH HYDRAULIC COLD REVERING MILL

Built: 1985

Entry Thickness: 1.524mm Nickel Alloys, Exit Thickness: 0.05mm, Rolling Speed: 0 - 150 m/min.

 

  1. 50.         USED 355 x 735 x 760MM 4-HIGH NON-REVERSING COLD ROLLING MIL

Rebuilt: 1991

Entry Thickness: 2mm Nickel Alloys, Exit Thickness: 0.4mm, Rolling Speed: 0 - 50 m/min

 

  1. 51.         USED H280/V180 3500MM RADIAL/AXIAL RING ROLLING MILL

Built: 2008  

Ring Diameter: 600 -3500mm, Ring Height: 100 - 800mm, Ring Weight: 8000 kg, Radial Force: 280 ton, Axial Force: 180 ton.

 

  1. 52.         USED DMA 10 CENTRELESS BAR PEELER

Built: 1971

Entry Bar Diameter: 80 - 320mm, Exit Bar Diameter: 80 - 300mm, Bar Length: 3.5 - 6m, Speed: 10 m/min

 

  1. 53.         USED AUTOMATIC SHEET-TO-SHEET POLISHING LINE

Built: 2008

Thickness: 0.4 - 4mm Stainless Steel, Max. Width: 1500mm, Max. Sheet Length: 3000mm, Comprises: 2 Belt Heads for N4 Finish, 3 Brushing Heads for SB Finish, PVC Coater, Conveyors.

 

  1. 54.         USED 2WRSS0 16-ROLL TWO PLANE SHAPE STRAIGHTENER

Built: 1990

Capacity: 5 - 12mm Rounds, Roll Diameters: 80mm, 2 x 5.5 kW Motors.

 

  1. 55.         USED 7-ROLL INBOARD BILLET & BLOOM STRAIGHTENER

Built: 1973

Capacity: 50 x 50 - 160 x 160mm Square, Roll Configuration: 3 over 4.

 

  1. 56.         USED SHEET-TO-SHEET POLISHING LINE

Built: 2008

Max. Sheet Width: 1600mm, Sheet Thickness: 0.4 - 3mm, Speed: 3 - 30 m/min, Two (2) Polishing Heads, One (1) Brushing Head.

 

  1. 57.         USED 12RFRG CENTRELESS BAR PEELER

Max. Bar Diameter: 310mm, Bar Length: 3.5 - 17m, Main Drive: 110 kW

 

  1. 58.         USED MKW 40 91 X 470MM X 500MM 4-HIGH COLD REVERSING MILL

Built: 1970

Max. Strip Width: 440mm, Max. Entry Strip Thickness: 4.25mm, Min. Exit Strip Thickness: 0.15mm, Rolling Speed: 0 - 500 m/min

 

  1. 59.         USED180 X 508 X 540MM 4-HIGH COLD REVERSING MILL

Built: 1971

Strip Width: 480mm

Rolling Speed: 0 - 500 m/min

Work Roll Diameter: 180mm

Back-Up Roll Diameter: 508mm

 

  1. 60.         Used Forging, Coining presses, Ring Mill

1,000 / 1,500 ton Forging press HSF

Stroke  1,250mm

 

2000 ton Forging press Hydrotek

Open height 2,300mm

Stroke             1,800mm

 

1,500 mm dia  Ring mill Mitsubishi MRX 1500

Out max.  ø1,700mm

Height   60~330mm

 

Coining Knuckle joint Press Barnaul K846

Nominal press force 800t

Slider stroke 160mm

 

  1. 61.         USED 60" WIDE X 30000 LB X 60" X 7" ARBOR CINCINNATI SLITTING LINE

UNCOILER
CAPACITY ............................. 30,000 LB X 60"
COIL ID .............................. 18" - 24"
SLITTER HEAD
SLITTING ARBORS .............
......... 7" DIAMETER
DISTANCE BETWEEN HOUSINGS ......
...... 64" MAXIMUM

 

  1. 62.         USED 60" X 10,000 LB BRANER BANDING AND PACKAGING LINE

COIL WEIGHT ...................... 10,000 LBS

COIL DIAMETER .................... 60"

 

  1. 63.         USED 48" X 18 GA X 20,000 LBS IOWA PRECISION FEED TO STOP BLANKING LINE

UNCOILER
WEIGHT CAPACITY ............. 20,000 LB X 48"
COIL I.D. ................... 19"-23"

 

  1. 64.         USED 48" HERR VOSS INVERTED CORRECTIVE LEVELER

NOMINAL STOCK WIDTH - 48"

THICKNESS CAPACITY - 024" .065"

ROLL WIDTH ...................... 60"

ROLL DIAMETER ................... 1.156"

 

  1. 65.         UsedDraw bench /Combined drawing machine /chamfering machine

A) Two Draw bench

1)make : Japanese Inner dia 24mm/68mm,  9.3 meters ---->>>30mm/50mm, 10.5 meters core dia 12.7-22mm, speed 21.6 meters/mn

2) Inner dia 10/50mm , 8.5 meters ---->>> 8/45mm , 9.5 meters, core dia 8.0~15.9 mm, speed : 13.5 meters/min

 

B) 3 Combined Machines

make Schumag

Speed : 1CM 0-60 meters/min

        2CM 0-100 meters/min

        3CM 0-150 meters/min

C) Chamfering machine

Make Japanese

Power supply 3P , 220V

working size  6.0~19.5mm dia

Processing length : Upto 9 meters

 

  1. 66.         New Hydrostatic Tester for Steel Pipes

A hydrostatic tester is a machine set to perform leakage and hydraulic pressure test on ERW, spiral welded or seamless pipes.

 

  1. 67.         DG sets plants

Each of the 4 plants comprises 12 Diesel Gensets with step up transformers and mid-voltage distribution switchgear. All can operate at either 50Hz or 60Hz and all have very low hours.

2 plants are based on FG Wilson Alternators and Perkins 4016 TAG2A Engines producing 3000 amps/1760Kw (standby) @ 50Hz/1500 rpm.

And 2 plants each have 12 SDMO Genset with Mitsubishi S16RPTA2 Engines each producing 3000 amps/1735Kw (standby) @ 50Hz/1500 rpm.

 

  1. 68.         USED 25.4MM BOLT MANUFACTURING LINE

Built: 1974

Capacity: 1" (25.4mm) Diameter x 12" (304.8mm) Output 35PPM

 

  1. 69.         Used Cold Rolling mill complex plant

Total area     : 58,679 sq.m

Out put        :  500,000 Ton per year

Products       :  Cold rolled steel in coil

Product specification  :  0.2mm~2.0mm thickness x 890mm~

                           1,250mm width

Coil weight : 25 MT Max.

Coil ID  :  508/610mm

 

  1. 70.         Plant consisting of 60/70 Ton EAF, LF and 4 Strand Caster alongwith several other related equipments

The Plant and equipment was manufactured in 1997 and worked only few months after which shut down- equipment practically never used

Can be sold by separate aggregates

 


__________________
Danny
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.